Participant Safety and Safety Systems
The most important element of adventure parks created for entertainment purposes is that users perform activities safely. The safety systems used in the park may vary as manual, semi-automatic and fully automatic systems. However, the rule that applies to all safety systems is to establish an uninterrupted safety line with 12 mm steel core or fiber core galvanized steel rope outside the trails and games in the adventure park. The safety line should be applied between the trees by stretching method and fixed with a press system and should be at a height that does not restrict movements of users.
EDELRID SMART BELAY SİSTEM
In this self-pulley safety system with semi-automatic control, the user is connected to the safety line by two carabiners, when one of the carabiners is opened and unconnected from the system during trail transitions, the mechanism prevents the other carabiner from opening, ensuring that the user remains connected to the system from at least one point. Equipped with a steel pulley suitable for adventure park use, the system does not require the use of a separate pulley for ziplines. The system has EN 354, EN 355, EN 566, EN 362:2008 EN 12278 standard certificates.
SAFE ROLLER CONTINUE SİSTEM
This full-automatic control system prevents the user from leaving the safety line without professional assistance. The system is maintained uninterruptedly with the equipment connected to the continuous safety line and participants cannot leave the system until the end of a trail. The system has EN 12278, EN 795 and EN15567 standard certificates.
TruBlue Climbing System
The biggest fear in amateur climbing wall activities that contribute to physical and mental development is of course the risk of falling. When performing a normal climbing wall activity, your safety must be manually ensured by a professional who is an expert in the field. In the climbing wall activity where Trublue safety system is applied, the risk of the user falling and accidents that may occur are reduced to zero without the need for professional assistance. In this system, which has TS EN 341 standard certificate and is used all over the world, the user is connected to Trublue system with the help of a rope and in case of a possible fall, the system locks itself and prevents users from falling.
Zip Stop
It is a braking unit that is installed on the line at the zipline end station, gradually reduces the user's speed and ends the activity safely, and works with a magnetic braking system.